NATUROIL 3100 Oil Modified Gloss

NATUROIL 3100 Oil Modified Gloss

Interior use only. Timber, particleboard, cork flooring and sports floors.

A single pack, clear, oil based floor coating which will enhance and protect the natural appearance of timber and parquetry floors.
  • Overcomes the risk of edge bonding on tongue & groove
  • Enhances the natural look of timber
  • Gloss finish
  • Excellent flow and levelling results in smooth finish
  • Enhances the natural colour of the timber without appearing ‘plastic’

Build : Medium
Sandability : Very Good
Levelling & Flow : Excellent
Coverage : Timber: 6-8m2 per litre Cork & Particleboard: 5-7m2 per litre – coverage is dependent upon the porosity of the timber
Dry Time : Recoat: 16 hours. Hard Dry: Overnight. Full Cure: 5-7 days
Clean Up : Polycure Super Cleaning Solvent
Packaging : 10L

Surface Prepartion:

Preparation: Preparing the floor to a professional standard is essential to achieve the best results. Fill all nail holes with a water based putty, allow to dry. Sand uncoated floor with 120-150 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.

Mixing: Stir thoroughly before use.

Tools: 6mm mohair roller and high quality brush.

 

Application:

  1. Apply a liberal first coat of NATUROIL 3100 or FASTASEAL 3030, 3540 Sealer using a 6mm mohair roller and good quality brush to cut in. If using FASTASEAL allow to dry for 45 minutes before sanding, for all other coatings allow to dry overnight (min 16 hours).
  2. Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust.
  3. Apply a second coat of NATUROIL 3100. Allow to dry (min 16 hours).
  4. Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust.
  5. Apply the final coat of NATUROIL 3100 Gloss.

NATUROIL 3115 Oil Modified Low Sheen

NATUROIL 3115 Oil Modified Low Sheen

Interior use only. Timber, particleboard, cork flooring and sports floors.

A low sheen is a single pack, clear oil based floor coating. Use as the final coat to achieve a low sheen finish over NATUROIL 3100 Gloss.
  • Overcomes the risk of edge bonding on tongue & groove
  • Enhances the natural look of timber
  • Low Sheen
  • Excellent flow and levelling results in smooth finish
  • Enhances the natural colour of the timber without appearing ‘plastic’
Build : Medium
Sandability : Very Good
Levelling & Flow : Excellent
Coverage : 10-12m2 per litre – coverage is dependent upon the porosity of the timber
Dry Time : Hard Dry: Overnight. Full Cure: 5-7 days
Clean Up : Polycure Super Cleaning Solvent
Packaging : 10L

Surface Prepartion:

Preparation: Preparing the floor to a professional standard is essential to achieve the best results. Fill all nail holes with a water based putty, allow to dry. Sand uncoated floor with 120-150 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.

Mixing: Stir thoroughly before use.

Tools: 6mm mohair roller and high quality brush.

 

Application:

  1. Apply a liberal first coat of NATUROIL 3100 or FASTASEAL 3030 or 3540 Sealer using a 6mm mohair roller and good quality brush to cut in. If using FASTASEAL allow to dry for 45 minutes before sanding, for all other coatings allow to dry overnight (min 16 hours).
  2. Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust.
  3. Apply a second coat of NATUROIL 3100. Allow to dry (min 16 hours).
  4. Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust.
  5. Apply the final coat of NATUROIL 3115 Low Sheen.

NATUROIL 3120 Tung Oil Sealer Low Sheen

NATUROIL 3120 Tung Oil Sealer Low Sheen

Interior use only. Timber, particleboard, cork flooring and sports floors.

A low sheen, single pack, clear, oil based floor coating which will enhance and protect the natural appearance of timber & parquetry floors.
  • Overcomes the risk of edge bonding on tongue & groove
  • Extremely durable
  • Low sheen
  • Excellent flow and levelling results in smooth finish
  • Enhances the natural colour of the timber without appearing ‘plastic’

Build : Low
Sandability : Very Good
Levelling & Flow : Excellent
Coverage : Basecoat – Timber: 10-12m2 per litre. Cork & Particleboard: 10-12m2 per litre. Subsequent Cotas: 10-12m2 per litre – coverage is dependent upon the porosity of the timber
Dry Time : Recoat: 16 hours. Hard Dry: Overnight. Full Cure: 5-7 days.
Clean Up : Clean all equipment using mineral turpentine
Packaging : 10L

Surface Prepartion:

Preparation: Preparing the floor to a professional standard is essential to achieve the best results. Fill all nail holes with a water based putty, allow to dry. Sand uncoated floor with 120-150 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.

Mixing: Stir thoroughly before use.

Tools: 6mm mohair roller and high quality brush.

 

Application:

  1. Apply a liberal first coat of NATUROIL 3120 or FASTASEAL 3030 Sealer using a 6mm mohair roller and good quality brush to cut in. If using FASTASEAL allow to dry for 45 minutes before sanding, for all other coatings allow to dry overnight (min 16 hours).
  2. Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust.
  3. Apply a second coat of NATUROIL 3120. Allow to dry (min 16 hours).
  4. Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust.
  5. Apply the final coat of NATUROIL 3120 Tung Oil.

NATUROIL 1499 Accelerator

NATUROIL 1499 Accelerator

NATUROIL 1499 may be added to NATUROIL 3100, Gloss, 3115 Low Gloss and 3120 Tung Oil sealer to reduce drying times

Catalyst to improve drying and through cure. Formulated to speed up drying time of NATUROIL 3100 and 3115.
  • Formulated to speed up drying time of NATUROIL 3100 and 3115
  • Minimise risk of frying of the next coating
  • Environmentally friendly LEAD FREE

Build : Medium
Packaging : 1L

 

NATUROIL 3180 Decking Oil

NATUROIL 1499 Accelerator

NATUROIL 1499 may be added to NATUROIL 3100, Gloss, 3115 Low Gloss and 3120 Tung Oil sealer to reduce drying times

Catalyst to improve drying and through cure. Formulated to speed up drying time of NATUROIL 3100 and 3115.
  • Formulated to speed up drying time of NATUROIL 3100 and 3115
  • Minimise risk of frying of the next coating
  • Environmentally friendly LEAD FREE

Build : Medium
Packaging : 1L

 

NUTRAOIL Product Page Image