Surface Prepartion:
Preparation: Preparing the floor to a professional standard is essential to achieve the best results. Fill all nail holes with a water based putty, allow to dry. Sand uncoated floor with 120-150 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.
Mixing: Stir thoroughly before use.
Tools: 10mm nap microfiber roller cover and high quality brush
Application:
- Apply a liberal first coat of AQUAPRO 8020 with a 10mm nap microfibre roller cover or weighted applicator bar and a good quality brush or FASTASEAL 3030 or 3535 with a 6mm nap microfibre roller and a good quality brush to cut in around skirting boards and edges. Allow to dry per datasheet. To reduce the risk of tannin bleed, use FASTASEAL 3535.
- Sanding is not essential, however for an improved finish, sand floor with 150-180 grade sandpaper or screenback. If FASTASEAL has been allowed to dry for longer than 24 hours the floor must be sanded. Vacuum all dust.
- Line marking can be set out and applied after the first or second coat. Check with the line marker or test the combination of the AQUAPRO Sports Gloss and the chosen line marking paint for compatibility and drying.
- Apply a coat of AQUAPRO Sports mixed with either AQUAPRO Sports Crosslinker or AQUAPRO Sports Part B Hardener. Allow to for 3 to 4 hours.
- Sanding is not essential, however for an improved finish, sand floor with 150-180 grade sandpaper or screenback. Vacuum all dust.
- Apply the final coat of AQUAPRO Sports mixed with either AQUAPRO Sports Crosslinker or AQUAPRO Sports Part B Hardener.
