AQUAPRO 8280 Sports Gloss

AQUAPRO 8280 Sports Gloss

Interior use only. Timber, particleboard & cork flooring.

A high performance. two pack, water based floor finish that has exceptional abrasion and chemical resistance and black heal mark resistance. Ideal for application to sports floors such as basketball courts, gymnasiums and multi-function halls.

  • Easy to apply
  • Excellent abrasion resistance & chemical resistance
  • Optional crosslinker for longer pot life or Part B hardener for the best chemical resistance
  • Fast drying
  • Non yellowing
  • Low VOC
  • High gloss

Colour : Clear
Finish : Full Gloss
Solvent Resistance : Excellent
Water Resistance : Excellent
Levelling & Flow : Excellent
Coverage : 10-12m2 per litre – coverage is dependent upon the porosity of the timber
Clean Up : Water
Package : 18L

Surface Prepartion:

Preparation: Preparing the floor to a professional standard is essential to achieve the best results. Fill all nail holes with a water based putty, allow to dry. Sand uncoated floor with 120-150 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.

Mixing: Stir thoroughly before use.

Tools: 10mm nap microfiber roller cover and high quality brush

 

Application:

  1. Apply a liberal first coat of AQUAPRO 8020 with a 10mm nap microfibre roller cover or weighted applicator bar and a good quality brush or FASTASEAL 3030 or 3535 with a 6mm nap microfibre roller and a good quality brush to cut in around skirting boards and edges. Allow to dry per datasheet. To reduce the risk of tannin bleed, use FASTASEAL 3535.
  2. Sanding is not essential, however for an improved finish, sand floor with 150-180 grade sandpaper or screenback. If FASTASEAL has been allowed to dry for longer than 24 hours the floor must be sanded. Vacuum all dust.
  3. Line marking can be set out and applied after the first or second coat. Check with the line marker or test the combination of the AQUAPRO Sports Gloss and the chosen line marking paint for compatibility and drying.
  4. Apply a coat of AQUAPRO Sports mixed with either AQUAPRO Sports Crosslinker or AQUAPRO Sports Part B Hardener. Allow to for 3 to 4 hours.
  5. Sanding is not essential, however for an improved finish, sand floor with 150-180 grade sandpaper or screenback. Vacuum all dust.
  6. Apply the final coat of AQUAPRO Sports mixed with either AQUAPRO Sports Crosslinker or AQUAPRO Sports Part B Hardener.

AQUAPRO 8780 Sports Gloss Part B

AQUAPRO 8780 Sports Gloss Part B

PART B HARDENER

Part B Hardener for use with AQUAPRO Sports Gloss.

Add 1 part AQUAPRO Sports Part B Hardener to 10 parts AQUAPRO Sports Part A by volume (10A:1B). Pot life approximately 6 hours at 20°C. High temperatures will shorten pot life.

AQUAPRO 8720 Sports Crosslinker

AQUAPRO 8720 Sports Crosslinker

IMPROVES CHEMICAL RESISTANCE AND ABRASION RESISTANCE

For use in AQUAPRO 8068 Hitek or AQUAPRO Sports Gloss to improve chemical resistance and early abrasion resistance.

Packaging : 360MLS

Add 20mls of AQUAPRO Sports Crosslinker per litre of AQUAPRO Sports Part A. Pot life is longer than 24 hours at 20°C. High tempertaures will shorten pot life.

NATUROIL 1440 Sports Gloss

NATUROIL 1440 Sports Gloss

Interior flooring. Sports floors such as gymnasiums, basketball courts and netball courts. Multi-function halls e.g. school halls, scout halls.

A single pack, clear, oil based coating for application to bare wood to enhance and protect the natural appearance of interior timber floors. Easy to apply, with excellent flow and levelling, it is ideally suited for application to sports floors such as basketball courts, gymnasiums and multi-function halls.

  • Easy to apply with excellent flow and levelling
  • Excellent inter-cat adhesion to both itself and AQUAPRO Sports Topcoat
  • Minimises the risk of edge bonding/gluing
  • Can be applied by roller and drag bar applicator

Colour : brown in can (dries cear)
Build : Medium
Solvent Resistance : Good
Water Resistance : Excellent
Levelling & Flow : Excellent
Coverage : 10-12m2 per litre – coverage is dependent upon the porosity of the timber
Clean Up : Use mineral turps to clean all brushes and rollers
Package : 10 & 20L

Surface Prepartion:

Preparation: Preparing the floor to a professional standard is essential to achieve the best results. Fill all nail holes with a water based putty, allow to dry. Sand uncoated floor with 120-150 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.

Mixing: Stir thoroughly before use.

Tools: Lint free 6mm mohair or microfibre roller or weighted applicator bar and good quality brush.

 

Application:

  1. Apply the first coat of NATUROIL Sports. This will penetrate into the timber and provide a sound base for the following coats. If line marking allow NATUROIL Sports to dry for a minimum of 24 hours. As an alternative FASTASEAL 3030 may be used for the first coat if a fast drying sealer is required. Sand with a 150-180 screen back to remove the timber grain rise.
  2. Line marking can be set out and applied after the first or second coat. Check with the line marker or test the combination of the NATUROIL Sports and the chosen line marking paint for compatibility and drying.
  3. Apply a second coat of NATUROIL Sports. Allow to dry for 16 hours, sanding is not essential but for maximum inter-coat adhesion it is recommended. For floors allowed to dry longer than 24 hours, NATUROIL Sports will need to be sanded with a 150-180 grit screen.
  4. Apply a third coat of NATUROIL Sports gloss.
Sports Product Page Image